Charge your Notebook PC
A.
Connect the AC power cord to the AC/DC adapter.
B.
Plug the AC power cord into a 100V~240V power source.
C.
Connect the DC power connector into your Notebook PC’s power
(DC) input port.
Charge the Notebook PC for 3 hours before using it in
battery mode for the first time.
NOTE: The power adapter may vary in appearance, depending on models
and your region.
IMPORTANT!
Power adapter information:
•
Input voltage: 100-240Vac
•
Input frequency: 50-60Hz
•
Rating output current: 6.32A (120W)
•
Rating output voltage: 19V
Notebook PC E-Manual
27
IMPORTANT!
•
Locate the input/output rating label on your Notebook PC and
ensure that it matches the input/output rating information on your
power adapter. Some Notebook PC models may have multiple rating
output currents based on the available SKU.
•
Ensure that your Notebook PC is connected to the power adapter
before turning it on for the first time. We strongly recommend that
you use a grounded wall socket while using your Notebook PC on
power adapter mode.
•
The socket outlet must be easily accessible and near your Notebook
PC.
•
To disconnect your Notebook PC from its main power supply, unplug
your Notebook PC from the power socket.
WARNING!
Read the following precautions for your Notebook PC’s battery:
•
Only ASUS-authorized technicians should remove the battery inside
the device (for non-removable battery only).
•
The battery used in this device may present a risk of fire or chemical
burn if removed or disassembled.
•
Follow the warning labels for your personal safety.
•
Risk of explosion if battery is replaced by an incorrect type.
•
Do not dispose of in fire.
•
Never attempt to short-circuit your Notebook PC’s battery.
•
Never attempt to disassemble and reassemble the battery
(for non-removable battery only).
•
Discontinue usage if leakage is found.
•
The battery and its components must be recycled or disposed of
properly.
•
Keep the battery and other small components away from children.
28
Notebook PC E-Manual